Pickup available at Strada Emil Monția 28
Usually ready in 2 hours
MagSleem X – The Invisible Magnetic Licence-Plate Holder
MagSleem X is the ultra-discreet magnetic solution for your licence plate. It delivers rapid installation and rock-solid holding power without compromising your car’s aesthetics.
✔ High-strength hold – Premium magnets ensure exceptional stability
✔ Truly invisible design – Practically disappears, keeping your vehicle’s look untouched
✔ Fast, simple mounting – Attaches directly to the licence plate in minutes
Choose MagSleem X and enjoy secure, elegant mounting with zero compromise!
Set includes
2 × / 4 × MagSleem X holders
2 × / 4 × MagSleem magnets
2 × / 4 × MagSleem pads
6 × / 8 × self-tapping MagSleem screws (M5 + M6)
2 × / 4 × cleaning wipes
1 × SleemFix alignment guide
Neodymium N52 magnets, custom made for maximum strength.
Designed for a quick and easy installation, so you can enjoy a show-stopping look as quickly as possible.
Anywhere* in the EU, because we know you want it ASAP.
What’s in the box:
-MagSleem X Plate Holders
-1 box of mounting pucks(2 pucks with a center hole for the magnets and 2 snap-on caps that go over the pucks)
-1 box of magnets•1 box of screws (3 types: Self-tapping; M5; M6)
-Alcohol wipes for cleaning the license plate
-SleemFix – positioning tool
Step-by-step installation:
1. Remove the old plate holder
Clean the bumper area so the new mounts grip firmly.
2. Prepare magnets and pucks
Insert each magnet into a puck, larger magnet opening facing up.
3. Select the right screws
Self-tapping:
- front bumper or rear without OEM holes.
M5 / M6:
- rear bumper with OEM holes only.
4. Insert screws through the magnet
hole
The magnet must already be seated inside the puck with the larger opening facing up.
5. Using the SleemFix alignment tool:
- Snap the two SleemFix pieces together to form the full jig.
- Insert the magnet pucks into the two side slots—one left, one right.
- Hold SleemFix by the centre and place it on the bumper, as close to center as possible.
- Mark the position and drive the first screw (left or right, whichever is easiest) just until SleemFix stays in place - do not tighten fully.
- Align the opposite side so SleemFix sits straight and parallel to the bumper.
- Drive the second screw, also only part-way.
- Loosen the first screw slightly and pull SleemFix downward to remove it.
- Now fully tighten both screws directly into the bumper—the position is locked in.
6. Snap the caps onto the pucks
Press each cap over its puck until you hear a soft click.
7. Mount the MagSleem X holders on the license plate
- Place the holders onto the pucks already fixed to the bumper, “Top” label facing up, and press lightly to ensure they seat correctly.
- Peel off the protective film from the double sided tape on each holder.
- Centre the license plate, bring it to the holders and press firmly for 30 seconds to 1 minute for a secure bond.
Orders are processed on working days and delivered within 1-2 working days. You will receive the AWB via email and SMS as soon as the parcel leaves our doorstep.
Products can be returned within 90 days if they are in the same condition with original packaging and all accessories.
The cost of return is borne by the customer, except in cases of defective or mis-shipped products. Please contact us before initiating the return
Yes. According to Ordinance 195/2002, license plates must be firmly mounted and always visible. The law doesn't forbid us anything, as long as the plate stays in place. Sleem holders ensure that.
The MagSleem, S and X sets are built to cope with everyday challenges.Potholes, harsh winters, puddles or washouts do not affect the hold.
The robust design and quality materials ensure durability and stability while maintaining an impeccable aesthetic appearance.
The products have been tested for over 5 years and validated by hundreds of satisfied customers.
For a secure and stable fit, the Sleem collection mounts require additional holes to be drilled in the bumper.
If your car already has OEM holes in the tailgate, you will receive M5 and M6 screws in your package, compatible with the manufacturer's supplied fastening.
This system ensures a solid fit and a clean, uncompromised look.
The chances are extremely slim, as license plates are not the main target of thieves. However, if someone is determined, they can try any method. With Sleem holders, we offer a secure and aesthetic grip and the risks remain minimal.
The Sleem holders are designed to sit firmly on the plate. If the plate is bent, curved or very worn, a little play may occur. We recommend straightening or replacing the plate if it's too damaged for a perfect fit.
